eDIY 5++ (3 in ONE) Scaffold Tower with 4 Telescopic Outriggers

Our eDIY Towers can reach a maximum working height of 6.8m (22’4″).

Our eDIY Advanced Plus Towers can reach a maximum working height of 7.15m (23’5″).

Our SUPER DIY Tower has a maximum working height of 9.35m (30’9″).

For anything taller please see our Trade King and Loyal Industrial Towers.

The eDIY range will fit into most estate cars.

Please check the packing size details in the specification table on the product pages and your car load space before ordering.

Yes, all our Scaffold Towers can be used indoors.

Yes you can; by releasing the bolt and wing nuts. Warning: It is dangerous to use the DIY tower without the base bars unless you tie the tower to something rigid or use outriggers.

Only if your existing tower is from our DIY tower range. You cannot mix brands from different manufacturers.

Yes, the two bottom base bars may need to be removed.

Strictly speaking, no. But having two or four outriggers will give a bigger footprint and make the tower feel more secure. In addition, the outriggers can give extra adjustments to uneven ground. Especially in garden use.

Certification is not currently required for DIY towers. Our domestic tower platforms are load tested according to EN1004 Class 3 standard.

Go for our eDIY Advanced Towers with height adjustable base plates.

See eDIY Advanced Towers.

Take a look at our video below where a colleague assembles an eDIY 5 Scaffold Tower in just a few minutes. The higher towers will take slightly longer, and it is advisable to do this with two people.

Quick Installation of the eDIY Tower – Standard Version

*Please see the bottom of the description table on the product pages for the pack sizes.

Only one person is recommended.

The DIY Tower base bars are 1.22m (4′) long.

The width of our DIY towers is 600mm (measured centre-to-centre on the frame uprights). The outer dimension is 40mm more.

Yes, you can buy a 2m extension pack. Please see eDIY Tower Accessories for the extension pack.

The extension pack has almost as much material as a tower. The pack includes an extra platform, 4 telescopic outriggers and the corresponding extension frames, horizontal braces, and diagonal braces.

The platform only requires 2 points of contact, one at each end, for a solid connection to the tower. They are required to hold the platform in position and avoid external forces from lifting the platform free.