eDIY Towers with Toeboard (Light Duty DIY) – Keeping our prices low at times of inflation

Yes, our eDIY and MDIY towers can reach a maximum working height of 7.15m (23’5″) and our SUPER DIY has a maximum working height of 9.35m (30’9″).

For anything taller please see our Trade King and Loyal Industrial Towers.

Super DIY 7S will fit into most hatchbacks with its 1m framed design.

eDIY range and Super DIY 8S/9S will fit into most estate cars.

Please check the packing size details in the specification table on the product pages and your car load space before ordering.

Yes, all our Scaffold Towers can be used indoors.

Yes you can; by releasing the bolt and wing nuts. Warning: It is dangerous to use the DIY tower without the base bars unless you tie the tower to something rigid or use outriggers.

Only if your existing tower is from our DIY tower range. You cannot mix brands from different manufacturers.

Yes, the two bottom base bars on the DIY tower may need to be removed.

Yes, they are included as standard so you can use the tower in the standard set up too.

Strictly speaking, no. But having two or four outriggers will give a bigger footprint and make the tower feel more secure. In addition, the outriggers can give extra adjustments to uneven ground. Especially in garden use.

Certification is not currently required for DIY towers. Our domestic tower platforms are load tested according to EN1004 Class 3 standard.

Go for our eDIY/MDIY/SUPER DIY Advanced Towers with height adjustable base plates.

See eDIY Advanced Towers | MDIY Advanced Towers | SDIY Advanced Towers.

Take a look at our video below where a colleague assembles a SUPER DIY 5S Scaffold Tower straight out of a small car in just a few minutes. The higher towers will take slightly longer, and it is advisable to do this with two people.

Assemble a SUPER DIY 5S Scaffold Tower straight out of a small car

*Please see the bottom of the description table on the product pages for the pack sizes.

Only one person is recommended.

The DIY Tower base bars are 1.22m (4′) long.

The width of our DIY towers is 600mm (measured centre-to-centre on the frame uprights). The outer dimension is 40mm more.

Yes, you can buy a 2m extension pack for your eDIY tower or MDIY tower and various extension packs for your SUPER DIY tower if required. Please visit the relevant accessories / upgrade section for the extension packs.

See eDIY & MDIY Tower Accessories | SUPER DIY Tower Upgrades.

The extension pack has almost as much material as a tower. The pack includes an extra platform, 4 telescopic outriggers and the corresponding extension frames, horizontal braces, and diagonal braces.

Please see Comparison of DIY Towers.

See help in selecting your scaffold tower for a handy questionnaire.

The platform only requires 2 points of contact, one at each end, for a solid connection to the tower. They are required to hold the platform in position and avoid external forces from lifting the platform free.

Our SUPER DIY tower platforms have one quick locking catch at one end and 2 hooks the other for easy removal. Simply release the hooks and depress the catch with one hand while lifting the platform with the other to remove.